The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.

Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters.

Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase our FSA 24.07x37 ceramic hybrid bearings separately.

• Bearings: Enduro ABEC-3
• Color: Black
• Bottom Bracket/Frame Interface: Cannondale PF30A
• Bottom Bracket Shell Width: 73mm
• Bottom Bracket Shell I.D.: 46mm
• Over Bearing Width: 91mm in 73mm wide shell*
• Crank Spindle Diameter: 24.00mm
• Tool Pattern: 44mm x 16

  € 164.49

  Meer informatie / bestellen >>>

  Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display.

€ 161.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Enduro BB86 to 30MM Ceramic Hybrid Sealed Bearings. Replace your BB86/92 bottom bracket with these flanged bearings and run BB386EVO cranks in your frame. For best results, use our 30mm cranks spacers to take up any play in your crankset. Each bearing presses directly in to your frame with our Large Sealed Bearing Press or Economy Bearing Press along with the 6806OB drift. Dimensions: OD: 41mm / ID: 30mm. 440-C stainless steel races with cryo treatment. Grade 5 Si3N4 ceramic balls. Dual row radial bearings with Kluber grease. Step type axial face seal both sides. Imported. Sold individually (You'll need to purchase two per frame).

€ 149.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight™, BB30A and Press fit 30A frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.

€ 69.49

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

BBRight™ Outboard Angular Contact BB for use with 24mm spindle (Shimano) cranks. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB's. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle (Shimano) cranksets. Packaged for retail display.

€ 165.00

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, Etc.). No adapters needed. Packaged for retail display.

€ 134.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Enduro BB86 to 30MM ABEC-3 Sealed Bearings. Replace your BB86/92 bottom bracket with these flanged bearings and run BB386EVO cranks in your frame. For best results, use our 30mm cranks spacers to take up any play in your crankset. Each bearing presses directly in to your frame with our Large Sealed Bearing Press or Economy Bearing Press along with the 6806OB drift. Dimensions: OD: 41mm / ID: 30mm. 440-C stainless steel races and balls. Dual row radial bearings with Kluber grease. Step type axial face seal both sides. Imported. Sold individually (You'll need to purchase two per frame).

€ 106.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

For adapting Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 - 24mm ID adapters. Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.

€ 72.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

None

€ 25.99

Meer informatie / bestellen >>>

Fietsonderdelen Shimano Fietsonderdelen Crank en trapas Trapas Adapters

Wheels Manufacturing's BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.

€ 135.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, etc.). No adapters needed. Packaged for retail display.

€ 165.00

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

The BB30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.

€ 72.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

De BB30-SRAM past 22/24mm Spindle Cranks (SRAM/TruVativ) aan op BB30 frames. Tik de adapters in het 6806 lager in de BB shell, installeer de spindel en de cranks. Gebruik de Crank Spindle Spacers om je kettinglijn aan te passen, of een zijwaartse beweging in je cranks op te vangen.

€ 72.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 73mm - 132mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display.

€ 161.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.

€ 69.49

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

BBRight™ Outboard ABEC-3 BB for use with 24/22mm spindle (SRAM) cranks. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB's. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle (SRAM) cranksets. Packaged for retail display. Note: Wheels Mfg BBRight™ Outboard BB for use with 24/22mm spindle cranks will not work with Quarq SRAM/GXP cranksets (SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, it will not fit over our BBRIGHT-OUT cup.

€ 134.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

Install 24/22mm (SRAM, Truvativ, Etc.) cranks into BB30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 5 Angular Contact sealed bearing in drive side cup. Enduro ABEC 3 sealed bearing in non-drive side cup. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks. No adapters needed. Packaged for retail display.

€ 111.49

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

None

€ 25.99

Meer informatie / bestellen >>>

Fietsonderdelen Shimano Fietsonderdelen Crank en trapas Trapas Adapters

Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.

€ 134.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 30mm, Weight: 149g, Packaged for retail display.

€ 161.99

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

De twee machinaal bewerkte aluminium cups worden in elkaar geschroefd en zorgen ervoor dat de trapas stabiel in het frame blijft, waardoor de levensduur van de lagers wordt verlengd en het onderhoud wordt vereenvoudigd. Dit betekent geen kraken meer, een soepelere werking, een langere levensduur van de lagers en een echt snelle lagervervanging. Specifiek ontworpen voor het installeren van SRAM DUB-compatibele cranks in Cannondale PF30A-frames (46 mm ID, 73 mm brede asymmetrische BB-schaal). . 2 - Siliconen stofafdichtingen. 2 - 0,5 mm afstandsstukken voor de krukas. 2 - 1,0 mm afstandsstukken voor de krukas. 1 - 2,5 mm afstandsstuk voor de krukas.

€ 164.49

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.

Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30A (42mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. BB30A is only used for Cannondale asymmetrical frames.

• Bearings: Enduro ABEC-3
• Color: Black
• Bottom Bracket/Frame Interface: Cannondale BB30A
• Bottom Bracket Shell Width: 73mm
• Bottom Bracket Shell I.D.: 42mm
• Over Bearing Width: 91mm in 73mm wide shell*
• Crank Spindle Diameter: 22/24mm
• Tool Pattern: 44mm x 16 notch
• Weight: 129g
• Packaged for retail display

* Over Bearing Width Dimensions include supplied silicone dust

€ 151.00

Meer informatie / bestellen >>>

Fietsonderdelen Wheels Manufacturing Fietsonderdelen Crank en trapas Trapas Adapters